Licensed & insured electrician · Lic #18871 · Bonded & insured Bergen County, NJ · available throughout New Jersey
Fuse Electric LLC Logo
HomeServicesWhole-Home Rewiring
Whole-Home Rewiring · Bergen County, NJ

Old wiring, finally put right.

From knob-and-tube and aluminum to modern, grounded copper — Fuse Electric rewires older Bergen County homes safely, cleanly, and fully up to NJ code. We handle the permit process and coordinate the required inspection, and most homeowners stay in the home while we work.

Free estimate No obligation Stay in your home Upload photos for quicker pricing
5.0 rated Knob-and-tube & aluminum Licensed #18871 Permit & inspection coordination
PhotoComing soon
finished rewire / new wiringReal Fuse Electric project photos are being documented for publication.
Knob-and-tube & aluminum specialists 🛡️ Licensed & insured 📋 Permit & inspection coordination Code compliant 📍 Bergen County local contractor

If your home was built before modern wiring standards, you may be living with an electrical system that's quietly past its prime. Fuse Electric provides whole-home rewiring across Bergen County, NJ — safely replacing knob-and-tube, aluminum, and worn cloth-insulated wiring with modern, grounded copper circuits. As a local, owner-operated electrical contractor based in the Township of Washington, we rewire homes in Paramus, Westwood, Hillsdale, Ridgewood, Wyckoff, Montvale, Tenafly, and surrounding communities — older houses we know well. We work room by room, keep the disruption to a minimum, and leave you with a system that's safe, insurable, and ready for everything a modern home demands.

Why homeowners choose Fuse Electric

The local rewiring electrician homeowners trust

📜
Licensed NJ contractor

Fully licensed New Jersey electrical contractor — License #18871.

🛡️
Fully insured

Bonded and insured on every job, for your protection and ours.

📋
Permit & inspection coordination

We handle the permit process and coordinate the required electrical inspection.

🏚️
Older-home specialists

We rewire knob-and-tube, aluminum, and cloth-wired homes all over Bergen County.

🧹
Clean, minimal-damage work

Careful fishing techniques and the fewest, smallest access holes possible.

📞
Direct owner communication

You talk to the person accountable for the work — not a call center.

🤝
Honest scope

Full rewire, partial rewire, or targeted repairs — we recommend only what you need.

🏠
Stay in your home

We sequence the work so most families keep living at home throughout.

What homeowners say

Rated 5.0 by Bergen County homeowners

Fuse Electric is rated 5.0 on Angi & HomeAdvisor — owner-operated, licensed (#18871), and insured. We publish only real, verified customer reviews, featured here as they come in.

Read our reviews 📞 201-397-5400
Signs your home may need rewiring

Warning signs we see in older Bergen County homes

Not every old home needs a full rewire — but these are the signs worth a professional look. If you recognize a few, send us a photo and we'll tell you honestly where you stand.

Knob-and-tube wiringUngrounded, brittle insulation
Aluminum branch wiringLoosens & overheats
Two-prong outletsNo ground present
Frequent breaker tripsOverloaded circuits
💡
Flickering / dimming lightsLoose or aging connections
🔥
Warm or scorched outletsHeat where there shouldn't be
👃
Burning smellStop and call right away
🧵
Cloth-insulated wiringDeteriorated over decades
⚠️
Smell burning, see sparks, or have an outlet that's hot to the touch?

Don't wait for an estimate — turn off the affected circuit if you safely can and call us at 201-397-5400. These can be signs of an active hazard.

PhotoComing soon
Knob-and-tube / old wiring removedReal Fuse Electric project photos are being documented for publication.
Knob-and-tube & aluminum

Why old wiring becomes a real problem

Knob-and-tube wiring was never designed for today's electrical loads. It has no ground wire, its insulation grows brittle with age, and it becomes a fire risk when buried under modern attic insulation. Aluminum branch wiring, common in homes wired in the mid-1960s to '70s, expands and loosens at connections over time, which can lead to overheating.

Beyond safety, both are increasingly an insurance and resale issue — many carriers now surcharge, restrict, or decline coverage on homes that still have them, and they're a frequent red flag on a buyer's home inspection. Replacing the wiring removes the hazard and usually resolves the coverage problem at the same time.

Get a rewiring estimate
What's included

A complete, code-compliant rewire — handled

Full wiring assessment

We inspect your existing wiring, panel, and circuits and map the right scope.

New copper branch circuits

Modern, grounded wiring sized correctly for each room and load.

Old wiring removed or retired

Knob-and-tube, aluminum, and cloth wiring safely removed or properly disconnected.

Grounded outlets & modern devices

Three-prong, GFCI, and AFCI protection where code requires it.

Panel evaluated & upgraded if needed

We confirm your panel can support the new system, or upgrade it cleanly.

Permit & inspection coordination

We handle the permit process and coordinate the required inspection — fully documented.

Minimal, patch-ready openings

The fewest, smallest access holes possible, left neat for patching.

Workmanship guarantee

Licensed, insured, and backed by our work — done right or we make it right.

Living through a rewire

Most families stay home while we work

A whole-home rewire sounds disruptive, but it doesn't have to be. We work room by room, keeping power on to the areas we're not actively touching and restoring power each day wherever possible. We plan the sequence around your household — bedrooms, kitchen, and work-from-home spaces included — and we keep the site clean as we go.

To run new wire through finished walls and ceilings, we use proven fishing techniques that need only small, well-placed access holes instead of opening up your home. Some patching is normal on any rewire; we keep the openings minimal and tell you up front exactly what to expect, including who handles final patching and paint.

Talk through your project
Free estimate No obligation Clear schedule up front
PhotoComing soon
New copper wiring & labeled circuitsReal Fuse Electric project photos are being documented for publication.
Permits & inspection

Done by the book — because it protects you

Rewiring in New Jersey requires an electrical permit and a town inspection — and on a project this important, that's exactly what you want. It means the new system is independently verified safe, which protects your insurance coverage and your home's resale value. Fuse Electric handles the permit process, performs the rewire to NEC and applicable local code, and coordinates the required electrical inspection. If contractor attendance is required by the municipality or inspector, we make the appropriate arrangements. You get a clean, documented, fully-permitted system — not undocumented work that creates problems when you sell or file a claim.

💡 Rewiring can make insurance and resale easier.

A documented, permitted rewire that removes knob-and-tube or aluminum wiring can resolve a common coverage obstacle and remove a frequent home-inspection red flag for future buyers. Outcomes vary by carrier and situation and aren't guaranteed — but we'll make sure the work is fully documented so you have what you need.

How it works

From assessment to a safer home

1

Send a few photos

Your panel, a couple of outlets, and any exposed wiring — for a faster, accurate estimate.

2

Assessment & estimate

We confirm the right scope and give you a clear, flat price and realistic schedule.

3

Permit & rewire

We pull the permit and rewire room by room — clean work, minimal disruption.

4

Inspection & done

We coordinate the required inspection; once it's complete, your home is documented and safe.

Recent work

Real rewires, real Bergen County homes

Before / afterComing soon
Knob-and-tube rewireReal before/after photos are being documented for publication.
Before / afterComing soon
Aluminum wiring replacedReal before/after photos are being documented for publication.
Before / afterComing soon
Rewire + new panelReal before/after photos are being documented for publication.
FAQ

Whole-home rewiring questions, answered

Common signs include knob-and-tube or aluminum wiring, two-prong (ungrounded) outlets, frequent breaker trips, flickering lights, warm or discolored outlets and switches, a burning smell, or cloth-insulated wiring. Many older Bergen County homes have at least one of these. We inspect your wiring and tell you honestly whether a full rewire, a partial rewire, or targeted repairs is the right call.
Both can become a safety and insurance concern. Knob-and-tube wiring is ungrounded, has brittle insulation, and is unsafe when buried in insulation. Aluminum branch wiring can loosen and overheat at connections. Many insurers now surcharge, restrict, or decline coverage on homes with either. Replacing it removes the hazard and usually resolves the insurance issue.
Usually no. Most homeowners stay in the home while we work room by room, keeping power on to the areas we're not actively working in. We plan the sequence around your household and restore power each day wherever possible. We'll set clear expectations before we start.
We use proven fishing techniques to run new wire through existing walls and ceilings with the fewest, smallest access holes possible. Some patching is normal on a rewire. We keep openings minimal and neat and leave the home patch-ready; we'll explain who handles final patching and painting up front.
It depends on the size of the home, the number of circuits, and access. A smaller home may take several days; a larger or harder-to-access home can take a couple of weeks. We give you a realistic schedule in your estimate before any work begins.
Yes — rewiring in New Jersey requires an electrical permit and inspection. Fuse Electric handles the permit process and coordinates the required inspection; if contractor attendance is required by the municipality or inspector, we make the appropriate arrangements. A permitted, inspected rewire protects your insurance coverage and your home's resale value.
Yes. Not every home needs a full rewire. We frequently do partial rewires — removing the remaining knob-and-tube, replacing a few problem circuits, grounding outlets, or updating a specific area. We recommend the smallest safe scope that solves the problem.
Often it makes sense to pair them. A rewire is the ideal time to upgrade an old or undersized panel so your service, circuits, and breakers are all modern and code-compliant. We'll tell you whether your existing panel can stay or should be upgraded, and price it clearly either way.
It can help. New wiring is a major selling point, removes a common home-inspection red flag, and can make insurance and financing easier for a buyer. While we can't guarantee a specific return, a safe, modern, fully-documented electrical system is a real asset at resale.
Explore related services

Often paired with a rewire

Service areas

Whole-home rewiring near you

Fuse Electric provides whole-home rewiring and old-wiring replacement throughout Bergen County — including Township of Washington, Paramus, Westwood, Hillsdale, Ridgewood, Wyckoff, Montvale, Tenafly, and surrounding communities — and across New Jersey depending on project scope.

Get a fast, no-pressure rewiring estimate

Snap a few photos of your panel, a couple of outlets, and any exposed wiring you can see — many estimates can be provided without an initial site visit. No pressure, no obligation, just a clear plan and price.

Free estimate No obligation Stay in your home Upload photos for quicker pricing
📞 Call Get estimate