Licensed & insured electrician · Lic #18871 · Bonded & insured Bergen County, NJ · available throughout New Jersey
Fuse Electric LLC Logo
HomeServicesWhole-Home Surge Protection
Whole-Home Surge Protection · Bergen County, NJ

One surge shouldn't cost you everything.

A single power surge can quietly fry your HVAC, appliances, EV charger, and electronics in an instant. Fuse Electric installs panel-mounted surge protection that guards every circuit in your Bergen County home — clean, code-compliant, and usually done in one visit.

Free estimate No obligation Usually a one-visit install Upload photos for quicker pricing
5.0 rated Protects the whole home Licensed #18871 Often a one-visit install
PhotoComing soon
🛡️
surge device at the panelReal Fuse Electric project photos are being documented for publication.
🛡️ Protects every circuit Usually a one-visit install 📋 Permit & inspection coordination Code compliant 📍 Bergen County local contractor

Today's homes run on electronics — circuit boards in the furnace and AC, the refrigerator, the EV charger, the TVs, the smart-home gear. That also makes them more vulnerable than ever to power surges, which can damage equipment instantly or shorten its life a little at a time. Fuse Electric installs whole-home surge protection across Bergen County, NJ: a surge protective device at your panel that stops large voltage spikes before they reach your wiring. As a local, owner-operated electrical contractor based in the Township of Washington, we protect homes in Paramus, Westwood, Hillsdale, Ridgewood, Wyckoff, Montvale, Tenafly, and surrounding communities — cleanly, to code, and usually in a single visit.

What causes surges

It's usually not lightning

Most surges come from everyday events — inside your home and on the utility grid — not dramatic storms. Whole-home protection addresses all of them.

Grid switchingUtility events & line work
AC & large motorsCompressors cycling on/off
LightningRare but most destructive
🔌
Appliance cyclingPumps, dryers, motors
🪛
Downed / damaged linesSudden voltage spikes
Power restorationThe surge when power returns
🏠
Internal wiring faultsSpikes from within the home
🔆
Loose connectionsIntermittent voltage events
Why homeowners choose Fuse Electric

The local electrician homeowners trust to protect their home

📜
Licensed NJ contractor

Fully licensed New Jersey electrical contractor — License #18871.

🛡️
Fully insured

Bonded and insured on every job, for your protection and ours.

📋
Permit & inspection coordination

When required, we handle the permit process and coordinate the inspection.

Usually one visit

Most whole-home devices are installed in the same appointment.

Quality devices

We install proven surge protective devices with a status indicator.

📞
Direct owner communication

You talk to the person accountable for the work — not a call center.

🤝
Honest recommendations

Layered protection advice — never an upsell you don't need.

📍
Local Bergen County company

Based in the Township of Washington and proud to serve our neighbors.

What homeowners say

Rated 5.0 by Bergen County homeowners

Fuse Electric is rated 5.0 on Angi & HomeAdvisor — owner-operated, licensed (#18871), and insured. We publish only real, verified customer reviews, featured here as they come in.

Read our reviews 📞 201-397-5400
PhotoComing soon
🛡️
Surge device wired at the panelReal Fuse Electric project photos are being documented for publication.
How it works

Layered protection, starting at the panel

A whole-home surge protective device installs right at your electrical panel and acts as the first line of defense. When voltage suddenly spikes, it diverts the excess safely to ground before it can travel through your home's circuits — protecting everything downstream, including the hardwired equipment you can't plug into a strip.

The best protection is layered: the panel-mounted device handles the big surges, and quality point-of-use protectors guard your most sensitive electronics at the outlet. Together they do what a power strip alone never can. We'll recommend the right setup for your home — no overkill, no upsell.

Get a surge protection estimate
Free estimate No obligation Honest recommendations
What it protects

Everything connected to your panel

HVAC & heat pumps

Furnace, AC, and heat-pump control boards are costly to replace.

Kitchen & laundry appliances

Refrigerators, ranges, dishwashers, washers, and dryers.

EV charger

Protect the dedicated circuit and the charger's electronics.

Computers & home office

The gear you can least afford to lose without warning.

TVs & entertainment

Televisions, receivers, gaming consoles, and streaming devices.

Smart-home & security

Thermostats, cameras, hubs, and networking equipment.

LED lighting

Modern LED drivers are sensitive to voltage spikes.

Everything else on a circuit

Whole-home coverage means the whole home — by definition.

Why a power strip isn't enough

Strips protect one outlet. This protects the house.

A plug-in surge strip only guards what's plugged into it, and it has limited capacity for a large surge. It does nothing for your furnace, your AC, your range, your EV charger, or any other hardwired equipment — which is exactly where the expensive damage happens.

Whole-home protection at the panel covers all of it at once, and it keeps working in the background without you thinking about it. Pair it with good point-of-use protectors on your most sensitive electronics and you have genuine, layered defense. A surge protective device also wears down as it absorbs energy over time, so we install units with a clear status indicator and show you how to know when it's time to replace it.

Talk through your home
PhotoComing soon
🏠
What it safeguardsReal Fuse Electric project photos are being documented for publication.
Permits & inspection

Installed at your panel — done by the book

A surge protective device is wired into your electrical panel, so depending on your municipality the work can require an electrical permit and inspection. Where one is required, Fuse Electric handles the permit process, installs the device to NEC and applicable local code, and coordinates the required electrical inspection. If contractor attendance is required by the municipality or inspector, we make the appropriate arrangements. You get a properly installed, documented device — not a risky shortcut at the most important panel in your home.

💡 Adding an EV charger or upgrading your panel? Add surge protection at the same time.

Combining the work is efficient and gives you whole-home protection while the panel is already open. Ask us and we'll include it as a clearly-priced option in your estimate.

How it works

From estimate to protected — usually one visit

1

Send a few photos

Your panel with the door open — we'll confirm it can take a surge device.

2

Free estimate

Clear pricing and the right level of protection for your home.

3

Install at the panel

We wire the device in cleanly — typically in the same appointment.

4

Protected & explained

We test it, show you the status indicator, and you're covered.

Recent work

Real installs, real Bergen County homes

Before / afterComing soon
🛡️
Surge device addedReal before/after photos are being documented for publication.
Before / afterComing soon
Surge + EV chargerReal before/after photos are being documented for publication.
Before / afterComing soon
Surge + panel upgradeReal before/after photos are being documented for publication.
FAQ

Surge protection questions, answered

It's a surge protective device (SPD) installed at your electrical panel that clamps down sudden voltage spikes before they spread through your home's wiring. Unlike a plug-in power strip that only protects one outlet, a panel-mounted device protects every circuit in the house — including the things you can't plug into a strip, like your HVAC, range, and EV charger.
Plug-in surge strips help at a single outlet, but they don't protect hardwired equipment and they have limited capacity. The best approach is layered: a whole-home device at the panel handles the large surges, and quality point-of-use protectors guard sensitive electronics. Together they give you far better coverage than a strip alone.
Most surges aren't from dramatic lightning strikes. Many come from inside your home — large appliances like AC compressors and well pumps cycling on and off — and from the utility grid through switching events, line work, and downed-line incidents. Lightning is the most destructive cause but the least common. Whole-home protection addresses all of them.
It protects everything connected to your panel — HVAC and heat pumps, refrigerators and appliances, your EV charger, smart-home gear, computers and TVs, LED lighting, and more. Modern homes are full of sensitive electronics and circuit boards, which makes a single surge potentially expensive.
Surge device installation is electrical work at your panel, so it can require a permit and inspection depending on your municipality. Where one is required, Fuse Electric handles the permit process and coordinates the required electrical inspection; if contractor attendance is required by the municipality or inspector, we make the appropriate arrangements.
A whole-home surge protective device is typically installed in the same visit — often an hour or two — as long as there's space and capacity at your panel. We confirm your panel is suitable first, and if it's full or outdated we'll explain your options.
Yes. The components inside an SPD absorb surge energy over time and eventually need replacement. Quality devices include a status indicator that shows when protection is still active, so you know when it's time to replace it. We'll show you what to look for.
Not necessarily — surge protection and breakers do different jobs. A surge device limits voltage spikes; a breaker protects against overloads and faults. If your breakers are tripping, that's a troubleshooting issue we can diagnose separately, and we'll tell you what's actually going on.
Often no — many panels can accept a surge protective device as-is. If your panel is full, outdated, or unsafe, we'll let you know, since a panel upgrade is the ideal time to add whole-home protection. We never recommend an upgrade you don't need.
Explore related services

Often paired with surge protection

Service areas

Whole-home surge protection near you

Fuse Electric installs whole-home surge protection throughout Bergen County — including Township of Washington, Paramus, Westwood, Hillsdale, Ridgewood, Wyckoff, Montvale, Tenafly, and surrounding communities — and across New Jersey depending on project scope.

Get a fast, no-pressure surge protection estimate

Snap a photo of your electrical panel with the door open — many estimates can be provided without an initial site visit. No pressure, no obligation, just a clear price and real peace of mind.

Free estimate No obligation Usually a one-visit install Upload photos for quicker pricing
📞 Call Get estimate